How to enable ssh in raspberry pi in boot partition in any media drive or flash drive #ssh #raspberrypi

-

 Enable SSH:

  • After flashing the OS, create an empty file named ssh (without any extension) in the boot partition of the microSD card. This enables SSH access.
After Booting

Connect to the Raspberry Pi:

  • Find the IP address of the Raspberry Pi on your network. You can use a network scanner or check your router’s connected devices list.
  • SSH into the Raspberry Pi using a terminal (replace pi_ip_address with the actual IP address):
    sh
    ssh pi@pi_ip_address
The default password is raspberry.

Comments

Post a Comment

Popular posts from this blog

SAMBA SERVER 2.0 #server

-
 To share a folder on a LAN using Samba on a Linux system, follow these steps: 1. **Install Samba**: If it's not already installed, you need to install Samba. Open a terminal and run:    ```bash    sudo apt update    sudo apt install samba    ``` 2. **Create a Directory to Share**: Create the directory you want to share, if it doesn't exist. For example:    ```bash    sudo mkdir -p /srv/samba/share    sudo chmod 2775 /srv/samba/share    sudo chown nobody:nogroup /srv/samba/share    ``` 3. **Configure Samba**: Edit the Samba configuration file to add your share.    Open the Samba configuration file in a text editor:    ```bash    sudo nano /etc/samba/smb.conf    ```    Add the following configuration at the end of the file:    ```ini    [share]    path = /srv/samba/share    browseable = yes    read only = no    guest ok = yes    create mask = 0660    directory mask = 2770    force user = nobody    force group = nogroup    ```    This configuration sets up a share called "sh
Read more

Setup SSH for accessing outside from network

-
To set up port forwarding for SSH from a router to allow external access to a Kali Linux machine, you need to configure your router and ensure your Kali Linux SSH server is correctly set up. Here's a step-by-step guide on how to do this: ### Step 1: Configure SSH on Kali Linux 1. **Install OpenSSH Server** (if not already installed):    ```bash    sudo apt update    sudo apt install openssh-server    ``` 2. **Start and Enable SSH Service**:    ```bash    sudo systemctl start ssh    sudo systemctl enable ssh    ``` 3. **Check SSH Status**:    ```bash    sudo systemctl status ssh    ``` 4. **Optional: Change Default SSH Port** (for security):    Edit the SSH configuration file:    ```bash    sudo nano /etc/ssh/sshd_config    ```    Change the line:    ```    #Port 22    ```    to something like:    ```    Port 8022    ```    Save the file and restart the SSH service:    ```bash    sudo systemctl restart ssh    ``` ### Step 2: Configure Port Forwarding on the Router Since router inter
Read more

Speech tools - espeak and festival etc.

-
 Using speech tools in Kali Linux involves installing and utilizing various software packages designed for speech processing, synthesis, and recognition. Here are the steps to get you started: 1. Install Required Packages Kali Linux is based on Debian, so you can use apt to install the necessary packages. Some popular speech tools include espeak , festival , and pocketsphinx . Install espeak espeak is a compact open-source software speech synthesizer for English and other languages. sudo apt update sudo apt install espeak You can test espeak by running: espeak "Hello, this is a test of the espeak system." Install festival festival is a general-purpose, multi-lingual speech synthesis system. sudo apt install festival You can test festival by running: echo "Hello, this is a test of the festival system." | festival --tts Install pocketsphinx pocketsphinx is a lightweight speech recognition engine from CMU Sphinx. sudo apt install pocketsphinx pocketsphinx-en-us Yo
Read more