ncat - HOW TO SEND MESSAGE TO MY ANDROID PHONE BY KALI LINUX IN SAME NETWORK

on

 To send a message to your Android phone from Kali Linux within the same network, you can use various methods depending on your specific needs and setup. Here’s a general approach using some common tools and techniques:

Method 1: Using Netcat (nc)

Netcat is a versatile networking utility that can be used for sending messages between devices in a network.

  1. On the Android Phone:

    • Install a netcat-like tool from the Play Store. Termux is a good choice, as it provides a Linux-like environment on Android.

  2. On Kali Linux:

    • Open a terminal window.

  3. Find the IP Address of Your Android Phone:

    • On your Android device, go to Settings > About Phone > Status and note down the IP address. Alternatively, you can use a network scanning tool like nmap from Kali Linux to scan your network (nmap -sn <network>).

  4. Send a Message:

    • On Kali Linux, use Netcat to send a message to your Android device:

      bash
      echo "Your message here" | nc <android_ip_address> <port_number>

      Replace <android_ip_address> with the IP address of your Android phone and <port_number> with an available port number (e.g., 12345).

    • On the Android device (using Termux or similar):

      bash
      nc -l -p <port_number>

      This command starts listening on the specified port (<port_number>) to receive the message from Kali Linux.

    • After running the command on Kali Linux, the message should appear on your Android phone in Termux.

  5. To send a message from one Kali Linux machine to another on the same network, you can use various methods depending on your needs and the setup of your network. Here are a few common methods:

    ### 1. **Netcat (nc)**
    Netcat is a powerful networking utility that can read and write data across network connections using TCP or UDP.

    **On the receiving machine:**
    ```sh
    nc -l -p 12345
    ```
    **On the sending machine:**
    ```sh
    echo "Hello, this is a test message" | nc <receiver_IP_address> 12345
    ```
    Replace `<receiver_IP_address>` with the IP address of the receiving machine.

    ### 2. **SSH**
    If SSH is set up on both machines, you can use `ssh` to send messages or execute commands remotely.

    **On the sending machine:**
    ```sh
    ssh user@<receiver_IP_address> 'echo "Hello, this is a test message"'
    ```
    Replace `user` with the username on the receiving machine and `<receiver_IP_address>` with the IP address of the receiving machine.

    ### 3. **Using a Simple Python HTTP Server**
    You can create a simple HTTP server on one machine and send a message via HTTP from another machine.

    **On the receiving machine (create a simple HTTP server):**
    ```sh
    python3 -m http.server 8000
    ```
    **On the sending machine (send a message using curl or wget):**
    ```sh
    curl http://<receiver_IP_address>:8000
    ```
    Replace `<receiver_IP_address>` with the IP address of the receiving machine.

    ### 4. **Using Message Queuing Systems (like RabbitMQ)**
    For more advanced and robust messaging, you can set up message brokers like RabbitMQ, Kafka, etc.

    ### 5. **Using SMB or Shared Folder**
    You can set up a shared folder and write messages into files that can be read by other machines.

    **On the receiving machine (set up a shared folder):**
    ```sh
    mkdir /shared
    chmod 777 /shared
    ```
    **On the sending machine (write a message to a file in the shared folder):**
    ```sh
    echo "Hello, this is a test message" > /shared/message.txt
    ```

    ### 6. **Using Instant Messaging Tools**
    For a more user-friendly approach, you can use tools like `net-send` (on Windows networks) or even chat applications like IRC, Slack, etc.

    Choose the method that best suits your needs and network configuration

Comments

Post a Comment